It is a default login IP that is reserved for wireless routers or modems. After typing 192.168.10.1 in the address bar of your browser, you will get a login page and then after filling in your current details you will get access to the admin interface of your router. 192.168.10.1 is mostly used by brands like D-Link, UPVEL, or TRENDnet.
By the way, you should know that it is not the only standard IP for routers. Actually, there are dozens of different IPs that were used to access the wireless router, Travel Router, or DSL Wireless Router control panels like 192.168.1.1, 192.168.0.1, or 192.168.2.1. Such a standard IP is also called the default gateway IP.
192.168.10.1 – 192.168.1.1 Router Admin Login
You know that there are many people who don’t know their router IP because in most cases there is only one situation where IP 192.168.10.1 is needed. And that is while the setup process by the technician.
So, you never need to use this IP 192.168.10.1. But sometimes, when you want to change the parental controls, the SSID (WiFi network name), or the Password of your WiFi then you need to use this IP 192.168.10.1.
You will see the router admin panel after logging into your router where you are able to see statistics, manage the data traffic, and configure the router settings.
Check Also: Xanathar’s Guide To Everything PDF
192.168.10.1 Login Steps
If you want to access your router’s admin panel that uses the 192.168.10.1 IP address, then you must have to follow these given steps.
- Firstly, you should make sure that the connection is made correctly, check the Power, LAN, WAN, and WLAN lights are on. The light should remain steady for the Power Button. And the next three diodes or lights should flash or blink continuously. Now after the successful installation, you need to move on to the following steps.
- You have to open a web browser on your device and then you will type the IP address http://192.168.10.1 on the browser’s search bar. If an error message comes on the screen then it means your router’s correct IP address is not 192.168.10.1. Sometimes, your browser’s autocompleting feature will mislead so you should check for any misspellings. If any error will not come then you will see the login page on your screen. Now put your correct login details and get access to your router’s admin panel.
- When you will reach the admin panel of the router then you can configure your router exactly as you want.
Note: If you have by mistake forgotten your username and password then you can easily recover them by following some steps. And if you don’t know about those steps then you can search for them on Google or Youtube. And If you never changed your router’s username and password then we want to recommend you take a look at our default router usernames and passwords list.
Read Also: Funny WiFi Names
Default Username & Password Combinations for Devices that Use 192.168.10.1
You will see a list here in which you’ll get the most used default usernames and passwords for the device IP 192.168.10.1.
|5||admin||(sticker on the bottom of the device)|
|13||admin||(label on the bottom of the router)|
Reset the password for 192.168.10.1?
All you have to do is to reset your router or modem. And for this, you have to click on the reset button that you will see at the bottom or at the back of your router or modem. If you will hold down that small button for approx 20 seconds then you will see that your router or modem will be restored in factory settings.
Read Also: Kinemaster Pro Mod Apk
Read Also: Best Safe ROMs Download Sites
You need to keep in mind that when you reset your modem, you will lose your connection online. That’s why we recommend you to take an expert’s assistance in this regard. If you do not know about this then you should take help from someone who has some details or knowledge about this.